Overview
This card is a 10GBase-T network adapter that’s runs on a high speed PCIe x4 host but interface.
This card hosts the Tehuti’s new 3rd generation TN4010 controller, and optimized 10 Gigabit Ethernet MAC designed for low-power, low-cost, single-port connectivity required by Application Servers and Workstations.
The TN4010 MAC is paired with Marvell Alaska 88X3110 transceiver, a low-power, high-performance 10 Gigabit Ethernet PHY, to enable tri-speed connectivity (10GBase-T, 1000Base-T, and 100Base-TX) over low-cost standard CAT-6a Ethernet cabling, up to 100m (Cat-5e and CAT-6 are supported compliant to Link Segment specifications).
This combination creates a new gateway to cost-conscious consumer applications, as well as to intensive data environments.
Diagram
Features
– Tri-Speed 10G/1G/100M Base-T
– Backward compatibility with 1000Base-T, 100Base-T Networks
– PCI Express Gen-2 x4 Host Bus interface
– EEE (Energy Efficient Ethernet)
– 16K Jumbo Frames
– IP, TCP, UDP checksum offloading
– IEEE 802.1Q Tagged VLAN
– Virtual NIC support
– Reduced CPU utilization and improved throughput
– Standard CAT-6A cabling with RJ45 Connector
Requirements
– Hardware
– The following system specs are recommended minimum for Windows & Linux
– PCIe slot: Available 4-Lanes PCI-Express slot gen 2.0 or later
– Processor: Quad Core 3.0GHz or higher
– RAM: 4GB memory or higher
– Software
– Operating systems supported are (both 32 and 64 bits)
– Windows 7
– Windows Server 2008 R2
– Windows Server 2012
– Windows 8.1
– Windows Server 2012 R2
– Linux 2.6.24 or later
Package Contents
1 x Single Port 10GBase-T Ethernet Network Card
1 x Driver CD
1 x User Manual
